ECO PRO2 INSTRUCTION 16. Special Functions
Special Function 1- Manual versus Automatic StartThe EcoPro2 default setting will automatically start repairing discs as soon as the lid is closed.
This setting can be changed so the EcoPro2 will not repair a disc until after the lid is closed and the Start button is pressed.
To change this setting, go into the Special Function mode by pressing and holding the FUNCTION button, then press and hold the STOP button.
Continue holding both buttons until the screen shows a flashing "SP-Func1" at the top of the screen.
You can change the setting from Automatic to Manual by pressing the STOP button once. The screen Will switch from “on” to “off”.
To save this setting and return to the main screen, press and hold the FUNCTION and the STOP buttons at the same time until the LCD display changes back to the main screen.
Note: Once you are in the Special Function mode, use the start button to scroll between SP-F1, SP-F2 and SP-F3
Special Function 3—Changing the Default Disc Repair TimeThe default time for a disc repair session is 60 seconds.
This setting can be changed so the default time is 30 seconds.
To change this setting, starting from them a in screen, press and hold the FUNCTION button, then press and hold the STOP button until it says "SP-Func1" flashing at the top of the screen.
Press the START button two times until the screen shows a flashing “SP-Func3” at the top of the screen.
The "SP-Func3" will read "1-2-4" .
Default settings—1 minute repair, increases to 2 minutes or 4minutes if the START button is pressed once or twice after the repair starts.
Optional shorter disc repair settings—30 second repair, increases to 1 minute or 2minutes if the START button is pressed once or twice after the repair starts.
To change to the shorter disc repair setting, press the STOP button once you see the top screen.
To save this setting and return to the main screen, press and hold the FUNCTION button and the STOP button at the same time until the LCD display changes back to the main screen.
- 1. Setup Instructions
- 2. Contents of Package
- 3. Description of Parts
- 4. Setting up the EcoPro
- 5. Using the KEY CARD
- 5.1 Attaching the Bottle Holder
- 5.2 Preparing the Waterand Polish Bottles
- 6. Starting the EcoPro
- 7. Operating the Pumps
- 7.1 Water Pump
- 7.2 Compound Pump
- 8. Installing the Pads
- 9. Repairing Discs
- 9.1 Choosing Disc Repair Mode
- 9.2 Stopping the Repair
- 10. Increasing the Repair Time
- 11. Cleaning the Pads
- 12. Add Water message
- 13. Change Key Card message
- 14. Daily Cleaning
- 15. Daily Checklist(can be removed and placed by machine)
- 16. Special Functions
- 17. LCD Display Summary Table
- 18. Error Messages
- 19. Alert Messages
- 20. Consumables
- 21. Maintenance Parts
- 22. Trouble shooting