ECO AUTOSMART 2. Description and Function of each part


  • There are LEDs to indicate repair mode number, repair process number, consumable material usage counter, repair setting time, and remaining time, and buttons for operation.

  • Door opens by pressing the Stop (red) Button when the main power is ON.

  • Connection for Drain Hose. During repair process, Drain Hose must to be connected.

  • Fuse: DIA * L = 5.2 * 20[mm] 250V/5A

  • Connect Power Cable.

  • This is where disc is placed to be repaired.

  • Holds & rotates Pad Holders.

  • Platen Motor Shaft drives Platen the Table.

  • Plate operates Pad Holders.

  • During automatic operation the LEDs display repair mode number (“1.“-“5.“) on the left side, and the ST (stands for “STAGE“, and means “repair process“) number (“1“-“5“) on the right side.
    When indicating consumable material usage counter, it displays the character meaning of consumable material (“1.”-“4.”, “C.”, “A.”, “F.”, or “r.”) on the left side, and the third (hundred’s place) digit of the counter on the right side.

  • During automatic operation the LEDs displays setting time and remaining time of each ST.
    When indicating consumable material usage counter the LEDs display the second (ten’s place) and the first (one’s place) digits of the counter.

  • Choose the button to select the repair level. With the Front Door closed the unit will start automatic operation:

    Pressing any button will pause automatic operation. Pressing any button will restart automatic operation.

  • Pressing the Stop (red) Button opens the Front Door when machine is idle.
    Pressing the Stop (red) Button makes the automatic operation pause.
    Pressing it again terminates the automatic operation.
    Pressing the Stop (red) Button resets errors.




Contents.