ECO AUTOSMART　3. LED Display

ST (Repair process) LED:
During the automatic operation, it displays repair mode number (“1.”-“5.”) on the left side, and ST number (“1”-“5”) on the right side.
When indicating consumable material usage counter, it displays the character meaning a consumable material (“1.”-“4.”, “C.”, “A.”, “F.”, or “r.”) on the left side, and the third (hundred’s place) digit of the counter on the right side.
“8” means initialization, “P” Pump Operation Mode, “E” error occurrence, and “AL” alert message.

TIME LED:
It displays setting time and remaining time of each ST, the second (ten’s place) and the first (one’s place) digits of consumable material usage counter, error number, and alert number.

ConditionST LEDTIME LEDNote
Initialization 8 8 8 8 After main power on
After termination of the automatic operation
After error reset
Front Door open   0   0  
Pump Operation Mode P -
or
1		 -
or
2		 -
or
3		 Refer to [5.3 Set consumable materials]
Standby 1.-5. 1-5
(Blink)		 Repair setting time The first repair process number/repair setting time of each repair mode are displayed
Preparing for each ST 1.-5. 1-5 Repair setting time
(Blink)		 Setting of the pad is performed, each motor starts rotation, and Sanding Lift moves forward
Repairing 1.-5. 1-5 Remaining time  
Finishing each ST 1.-5. 1-5   0
(Blink)		 Sanding Lift moves to the home position, and Turret moves to next pad if needed
Suspending each ST 1.-5.
(Blink)		 1-5 Remaining time All motors stop, Sanding Lift moves to the wait position, and Front Door opens
Checking consumable material usage counter 1.-4.
C.
A.		 Consumable material usage counter
(The third digit)		 Consumable material usage counter (The second and the first digits) Each counter can be cleared by pressing and holding “MODE” Button corresponding with it on more than 3 seconds
“F.” and “r.” are displayed only when the Water recycle system (OPTION) is added
F.
r.
Error E 0-5 Error number Refer to [6. Error occurrence]
Alert A L Alert number Refer to [7. Alert List]




Contents.