ECO SMART INSTRUCTION　7. Daily maintenance

7.1 Daily cleaning

Daily cleaning is needed for proper performance of the machine and disc finish.

CAUTION!

1. Turn off the Main power with front door open and unplug the power plug.

2. Do not use the below solvents.
Thinner / Benzene / Wax / any solvent of high acidity or alkalinity

Main unit
Wipe the exterior of the machine with a damp soft cloth.

Under splash cover
Use damp soft cloth with water or window cleaner to remove left over Compound and debris.

Splash cover and repair chamber:
Use damp soft cloth with water or window cleaner to remove left over Compound and debris.

7.2 2 Daily inspection

7.2.1 Pad holder Velcro
Make sure that the edges of the Velcro are not coming on the edges of the pad holders .

You can order new Velcro for the pad holders by calling ELM-USA.

7.2.2 Center seal
Replace the center Seal when it shows signs of wear.

Contents.

• 1. How to install
• 　 1.1 Contents of packing
• 　1.2 Placement of machine for installation
• 　 1.3 Moving the unit
• 2. Description and Function of each part
• 3. LED Display
• 4. Pad and ST (Repair process) number
• 5. How to use
• 　5.1 Preparation before operation
• 　5.2 Power on and off
• 　 5.3 Operation process for repairing disc
• 　 5.3.1How to switch between CD/DVD and Blu-ray repair modes
• 　 5.4 Changing between CD/DVD and Blu-ray repair
• 　 5.5.Pad usage counter function
• 6. Error occurrence
• 　 6.1 Error code
• 　 6.2 Error reset
• 　 6.3 Error List
• 　 6.5 When the front door does not open
• 7. Daily maintenance
• 　 7.1 Daily cleaning
• 　 7.2 2 Daily inspection
• 　 7.2.1 Pad holder Velcro
• 　 7.2.2 Center seal
• 8. After Service
• 9. Specifications
• 10. Wiring Diagram
• 11. Maintenance Parts