ECO AUTOSMART 11. Wiring Diagram
Main Board
Contents.
| Symbol | Part name | Symbol | Part name |
| IN | AC Inlet | SE1 | Sanding Motor Sensor |
| SF | Switch + Fuse | SE2 | Front Door Sensor |
| PS | Power Supply | SE3 | Turret Position Sensor |
| MB | Main Board | SE4 | Turret Origin Sensor |
| PB | Panel Board | SE5 | Lift Origin Sensor |
| SE6 | Platen Motor Sensor | ||
| SE7 | Spare (No use) | ||
| M1 | Sanding Motor | SE8 | Pad Holder Detect Sensor |
| M2 | Platen Motor | ||
| M3 | Lift Motor | FAN1 | Fan |
| M4 | Turret Motor | SOL1 | Door Lock Solenoid |
| P1 | Water Pump | ||
| P2 | Compound Pump |
Contents.
- 1. How to install
- 1.1 Contents in package
- 1.2 Location for Installation
- 1.3 Moving the machine
- 1.4 Sending back the machine to ELM USA
- 2. Description and Function of each part
- 3. LED Display
- 4. Pad and ST (Repair process) number
- 5. How to use
- 5.1 Set-up
- 5.2 Power on and off
- 5.3 How to operate Water and Compound Pumps
- 5.3.1How to switch between CD/DVD and Blu-ray repair modes
- 5.4 Setting a disc for repair
- 5.5 Operations for repairing disc
- 5.5.1 Explanation of repair mode
- 5.5.2 How to start a repair
- 5.5.3 Understanding displays on LEDs when machine is repairing a disc
- 5.5.4 Pausing the repair process
- 5.5.5 Process completion
- 5.5.6 Consumable replacement alerts
- 6. Alert List
- 7. Error occurrence
- 7.1 Error code
- 7.2 Error reset
- 7.3 Error List
- 7.4 Manually opening the Front Door
- 8. Daily maintenance
- 8.1 Daily cleaning
- 8.2 Daily inspection
- 9. Servicing machine
- 10. Specifications
- 11. Wiring Diagram
- 12. Maintenance Parts